Home - Support

5s.jpg

 E-user manual and video files are available below. For your information.



 


5s2_01.jpg
5s2_02.jpg

User Manual

Video
5s2_05.jpg
5s2_06.jpg

User Manual


Video
5s2_09.jpg



 

  

 

5s3.jpg

You are welcome to DIY RYDIA camera vision system as per the steps below.
Or ask professional staffs to mount it after contact with our customers service.

 

 

5s4.jpg5s5.jpg5s6.jpg

Choose an area towards the top of the windscreen and behind the rear view mirror for the camera to sit.

Clean the screen with glass cleaner and Allow drying time.

Peel the adhesive backing away from the cameramount and place firmly on the screen.

5s7.jpg5s8.jpg5s9.jpg

Leave the mount to bond for a few Minutes

Route the power cable neatly around the be able to hide the cable completely by pushing it into the gap between the rubber and the screen. 

Run the cable around the side of the dashboard and underneath towards the cigarette lighter socket. Use the cable ties to hide any remaining cable behind the dash. 

5s10.jpg5s11.jpg5s12.jpg

Attach the camera to mount and face it forwards. Keep the camera as level as possible. (in a Truck or Bus, aim the camera slightly down) 

Plug the power cable into the Camera.

Plug the cable into the vehicle’s accessory socket.

 


5s13.jpg

You are ready to start driving in the knowledge that you are protected by
RYDIA Vision’s complete video and data protection.

 

 

 

COPYRIGHT © RYDIA TRADING. ALL RIGHTS RESERVED